Descrizione
CDX1-1747 60W 8ohm HF Ferrite – Celestion
codice: PPEK15300007
Celestion – CDX1-1747 60W 8ohm – HF Compression Driver – Ferrite
Driver a compressione con magnete in ferrite, uscita da 1", potenza 60Watt, impedenza 8ohm, diaframma in polymide (poliimmide), fissaggio con viti (bolt).
Voglia di audio Fai da Te? Per il progetto di un diffusore PA 15" 2-vie, Caratteristiche
– 1" exit, ferrite magnet compression driver with 1.75" edgewound copper clad aluminium voice coil
– 60Wrms power handling (AES standard) and 110dB sensitivity
– Next generation Sound Castle™ soft clamping assembly reduces diaphragm stress for reduced distortion and even greater reliability of performance
– One piece Polyimide diaphragm and surround
– Finite Element Analysis (FEA) used to optimise both magnet assembly and acoustic design
Specifiche Generali
Power rating(1): 60Wrms
Continuous power rating(2): 120W
Nominal impedance: 8ohm
Frequency range: 1000-20,000Hz
Sensitivity(3): 110dB
Recommended min. crossover (12dB/oct): 2000Hz 12dB/oct
Voice coil diameter: 44mm/1.75in
Voice coil material: Edgewound Copper Clad Aluminium
Magnet type: Ferrite
Diaphragm material: Polyimide
Surround material. Polyimide
Informazioni di Montaggio
Width: 120mm/4.72in
Depth: 53mm/2.08in
Weight: 2.3kg/5.1lb
Fitting: Flange (2/3 M6 holes on 76/57.2, 3.0/2.224in PCD)
Throat exit: 25.4mm/1.0in
Trombe Compatibili
H1-9040P, H1-7050 "No Bell"
Note
(1)Tested for two hours on plane wave tube using a continuous, band-limited pink noise signal as per AES standard. Power calculated on minimum impedance.
(2)Continuous Power Handling is defined as 3dB greater than the AES rating.
(3)Measured on axis at 1W, 1m, using typical horn, in 2 anechoic environment.
/p>
/p>
/ pa compression drivers
EAN/UPC 739894584852